977L Boost Pressure
Recently installed a boost gauge on my 977L and was surprised by the readings, at full RPM (Under load) the highest pressure i've seen is 7-8 PSI. Is this about right for this machine? The engine is...
View Article955k
I have a 955k track loader and it's getting hot ive done changed the thermostat and cored the radiator out and flushed the block out so what else could it be?
View Article977k fuel filter
Can someone help me find where the fuel filter is on a 977k? I have looked what seems like everywhere and I can't seem to find it I know it has to be right infront of me I just am looking over it. Also...
View ArticleClik here to view.
Cracked tranny and bearing replacement
Using the 955L and oil starts blowing down next to the belly pan. Get the pan off and appears what happed prior to this issue, was the machine was run without the pan and it hit something that cracked...
View Articlestarter bolts
how do I get the starter bolts out on a1986 John Deere 455E track loader with a 4 way bucket down. Is there a special wrench I have to buy from JD or another source
View ArticleClik here to view.
Case 350 PTO?
Hey everyone, I just bought a 1972 Case 350 crawler loader. I am looking for a PTO, I know its a long shot but looking for parts is part of the fun of buying old iron. Any help would be appreciated....
View ArticleClik here to view.
941 Grouser Build Up
The grousers on my 941 are badly worn, but I am not about to replace them for the amount I use the machine. The chains are pretty good, but someone had put old pads on the good chains somewhere along...
View ArticleTorqflow transmission?
Can anyone tell me what the lubrication Valve and the Torque Converter Valve do and how it works on a Torqflow transmission?
View ArticleClik here to view.
New to me Case 1155E
Hi all, I just joined this forum to see if I may could gleen a little information about the loader that I just bought. Its a testament to US Government efficiency. 30 year old machine with 21 hours....
View ArticleCat 963c bucket to deere
Anyone know if a cat 963c bucket would work on a Deere 755c track loader without modifications? Thanks
View ArticleClik here to view.
Caterpillar 977L 3306 Fuel in oil, And lots of it! HELP!
Hello, new to the forum but not new to forums. I purchased a 977L with a 3306 in it about 6 months ago. The loader had been in a fire and i felt like I could revive it. The fire was mainly in the back,...
View ArticleNeed help with 2004 GEHL CTL80 not wanting to move
Hello all, I am new to the world of track loaders and the forums, but I am in need of some help. I have a 2004 GEHL CTL80 with approx. 2500 hrs, and I just changed the hydraulic filters and refilled...
View ArticleA start on Rebuilding my old Allis
Have not looked at Craigslist for some time, just saying and today had a wild hair to peek. Looked around a bit then went to heavy machinery and last on the last page two 1"x10"x8' cutting edges. Damn...
View ArticleClik here to view.
Aftermarket parts
Looking for a chain guard for a Deere 755c series 2. Called Deere and a little over 6000 for the outer and inner guards and hardware for both sides. Seems way to high to me. Anyone have another outlet...
View ArticleInjection pump gear on 3304
Think I have the engine timed correctly. Ready to put the gear on the injection pump. Manual says to hold a clockwise force on the gear while torquing. I don't understand this unless it's meaning...
View ArticleClik here to view.
977L Injector pump
Hello everyone, I posted some time ago about a friend of mine's 977L with fuel delivery problems, ie. won't run. I finally had a chance to go look at the machine and talk to him, and he did have...
View ArticleRadiator removal
Can some one point me to a link where I can find radiator removal procedures? Need to replace it head and turbo. Thanks Dan
View ArticleBobcat m series
Hi anyone have a new bobcat track loader with shattering through hydraulic when useing a comanation bucket the new accumulator in the m series is only compatible with less functions it can't handle...
View ArticleIH100E battery questions
I was wondering if anyone knows whether or not the 100E takes two 12 volt batteries or one? When I got into the battery box it looks as if it had two at one point but now only has one refurbished...
View ArticleCat 257b parking brake wont release really need help
I really need some help !!! i have cat 257b and the parking brake wont release.When i get in the machine and turn the key to the on position the display on the machine beeps and all of the panel lights...
View Article