Cat 953 need to adjust steering brakes, please help
Hi there, I have a CAT 953 traxcavator, at present the right turn brake is not as effective as I would like, can anyone tell me how to adjust the brakes?
View Article951C coupler
anyone tried to replace a torque to engine coupler without removing the trans or engine
View ArticleClik here to view.
Cat 955 12A
I am new to the forum but have lurked on ACMOC as well. I have some experience running dozers and ford backhoes doing similiar work but I thought I would ask for some thoughts on a piece of equipment I...
View ArticleRebuilding 943 fuel Transfer Pump
I am in the middle of rebuilding the fuel transfer pump (1W568) on my 943 (19Z935). The service manual disassembly/re-assembly pictures and sequence instructions do not include some some seals and...
View Article943 Track Adjuster.
I need to reseal my track adjuster. Question is , does the idler have to come off or can the adjuster be removed thru the access plate. S/N 03Y01878
View Article100E Starter problems
I have an IH 100E and was wondering if anyone has replaced a starter on one? I put 2 new batteries in it and a new solenoid and all it will do is click. The starter won't turn over. Should I drop the...
View ArticleClik here to view.
Working Lights on my 941 Loader
Finally got some working lights on the 941 loader. When I purchased the machine there were none working & they were mostly smashed & contorted into some unusual shapes from rough use &...
View ArticleRepair shops
Well as I write this I ready to go retrieve a spare radiator from my donor I had a shop look over and clean up. They could not or would not do a complete job as they did not have heavy enough equipment...
View ArticleClik here to view.
941 Bucket Positioner Repairs
Since purchasing this old machine a year ago, the bucket positioner has not worked & is on my bucket list of things to repair. The rod/clamp is missing that clamps onto the cylinder rod. The valve...
View ArticleAdvice In Older Small Track Loader
New to the site. I am getting ready to be in the market for an older small track loader around the size of a John Deere 450 in the next year. I know there are several different manufacturers other than...
View ArticleJD 9250 backhoe on Case 350
Hey gents, I am looking for some advice on putting a JD 9250 backhoe on a Case 350. Any pros or cons would be helpful. I do have the counter weight arms for the case but I'm sure I will have additional...
View Articlelooking at a 951c
I am looking at a 951c loader it has a rebuilt engine with about 10 hours on it since rebuild runs good but it has been sitting outside and not run for about 4 years it moves but I checked the trans...
View Article1968-1971 Cat 955K
Hello this is my first post on this forum thanks for having me. I was wondering if anyone could give me a ballpark value of a 1968-1971 Cat 955K. Also if there are things i should check when going over...
View ArticleCat 955K engine
I have a 955k serial # 71j2208 and I can not identify the motor. All information points to a 3304 but it has the old style round water pump and a scroll injector pump which says D330C. The only number...
View ArticleLiebherr 622b moving issues
Hey guy's. I just signed up for the forum as I stumbled across it while trying to research and find out what I can do with this 622b. We replaced the splitter box in it, and it was working fine. One...
View ArticleCASE 450b torque converter leaking???
Hello. I bought a CASE 450b high lift last fall. Its year is 1980. I used it this summer to drain and rebuild a small pond. It worked well aside from some leaking hydraulic cylinders, busted hydraulic...
View ArticleGehl ctl60
Have a gehl ctl60 doing some work yesterday and it just shut off no spider or nothing it. It was getting a little warm so checked and added a little coolant . Now it won't start flashing engine coolant...
View ArticleClik here to view.
941 Seat Repairs
Another of the items of things to do on my bucket list of repairs on the 941 was improving the improvised seat system instituted by one of the previous owners. It looks like a John Deer mower seat...
View ArticleHelp! How to get hyd. hose off on 931B
I'm really hoping somebody has a repair procedure or knows how to change a hose on a Cat 931B loader. The boom cylinder hose for lowering on the right side blew. The boom was up so it's not too hard to...
View ArticleCAT 973D? Right machine?
OK so need some advice since I have no experience with track loaders. Not real popular in this area, CAT dealer doesn't even have one around for us to sit in or try out. We have a particularly wet...
View Article