Which undercarriage ?????
I'm in the market for a new undercarriage for my 953C track loader. I got an estimate from CAT for 26000.00 . Also got estimates for VTRACK , ITM, and ITR undercarriages . Don't know anything about...
View Article955K drive questions/ suggestions
OK, I have a 955K. 85J4318. The brakes are near the end of adjustment. Seems to run good. No real issues. So, I am not scared of putting in the brake bands/ pads. I will check steering clutches while...
View ArticleGrade Beam/Lane Plane for Hi-Lift
There was a guy from Aus. that posted pics of landplane with brackets that could be clamped down with a 4n1 bucket to fine grade or brush areas down. I searched around on here and can't find them, does...
View Article953c undercarriage
Any body used the aftermarket brands such as VTRACK, ITM, ITR or BERCO?
View Article287b cat Oil light
We are looking to buy a 287b and the guy says it runs good and strong but he says the oil light comes on after it warms up. Any ideas what might be causing the light to come on???
View ArticleThis is a new one to me, anyone else seen one before???
I was just looking at some used track loaders and came across this, a "side dumping bucket"!??! Personally I have never seen one before now, and I was just wondering if anyone else was familiar with...
View ArticleCowman270--question on fluids in a Dresser 125G
Hello, new on here First time posting, just got a Dresser 125G track loader, what oil would ya run in the Transmission and final drives on this loader, also looking for a owners manual for it, anybody...
View ArticleClik here to view.
Leaking {duo-cone** seals- 955l
]Looking for any INFO on outer seals on sprocket. Has any one ever replaced these, if so I would like to hear if u have any TIPS, TRICKS OF THE TRADE, OR INFO. THANKS!!!![ATTACH]99025[/ATTACH Attached...
View ArticleCase 1150 Track Loader (will not move)
Hi everybody! Are there any CASE mechanics out there? I have an 1150 track loader that will not move. Parked it there a few months ago now I do not see any pressure or any kind of attempt for movement...
View ArticleJD450 Radiator
How do you get the radiator out of a JD450? I have unbolted all the bolts I can find. Do you need to take the front cowl off? If yes how does it come off? If not can the radiator come out the front of...
View ArticleT-200 Error code 14-03
Good afternoon fellas, Two hours into plowing snow this morning my Bobcat T-200 just died. I can crank it over but no start. It gives me a code 14-03 when trying to start it...BUT....If I check for...
View ArticleT200 / ACS error on auxiliary oil flow
Hi guys, here's a tricky one, my t200 is throwing the acs light on when l press the attachment button, there is a code 84-02 (acd/racd E error on) what ever this means, l have std control panel and...
View ArticleStuck 455c
Looking help for getting my 455C unstuck. Its sitting at a 45 degree angle the right track is below ground. The left track is on solid ground. Its sitting between two stumps that I have cut off low in...
View Articlet 190 foot controls wont work
i have a t 190 and now the foot controls feel like they are not turing on when the machine is started. The machine will track but not raise or lower boom nor curl.
View ArticleTakeuchi tl130
My TL130 starts and runs for 10-15 seconds then shuts off leaving the oil pressure/coolant level light blinking. Both are at the proper operating level. What could be causing my machine to shut down?
View ArticleMaybe close to giving up
Went on to another 955L, had a 4 in 1 on it, before I got up to the machine the owner came to me explaining it had sold minutes before I arrived, guy paid once again in cash. This one did look good, at...
View ArticleAdding a track loader
I'm considering adding a true track loader to my little fleet. I have a solid skid steer and a mini ex but lately the jobs coming in seem to be a bit big for a skid steer. I rented a tl250 for 2 weeks...
View ArticleAdding hydraulic's
I use my case 455c on the farm. I want to add a hydraulic connection to run a disk that I can pull. If I use the line that operates my 4 in 1 bucket and put quick connects on it would that suffice?
View Article939 C electrical problem
I have problems with shut down system. The solenoid itself works as I can jump to it and shut the engine down. I replaced the timer and unfortunately that wasnt the problem ($286). I am thinking it is...
View ArticleJD 755A Track Loader
Looking a a 755A loader, any pointers about good points and bad on these loaders? If it will move, but right side won't pull under load, any idea what is wrong? Thanks in advance, you guys have helped...
View Article