1972 International Harvester 250 C need a part number
Hello, We have a 1972 IH 250 C Track Loader with a rusted out manifold. This part bolts to the bellhousing and exits exhaust from the turbo. It curls around and bends to connect to the exhaust stack. I...
View ArticleDresser 125G loader safety prop
I have a 125G track loader and the loader safety bar was not there when I bought it. I was wondering if some one could post a picture of one or a good idea of one I could fabricate. My Finney manual...
View ArticleStill looking for a loader
A couple within 75 miles of here on Machinery trader. A 931 and a 935B. What are the good and bad of those besides condition? thanks
View ArticleClik here to view.
Bucket Repair
Is this bucket repairable? I was planning doing it myself. The weak spots on the rear of the bucket are about 8" wide and 12" long. I was told to use 1/4" plate. Will I be able to heat it enough with...
View ArticleChanging Oil on CAT 941B
Hello Gents, I'm looking to change the engine oil on the CAT 941B I have and have some basic questions. I'm assuming I'll have to drop the belly pan to drain the oil. What type/weight oil should I be...
View Article931 loader governor question
I bought a 931 loader. It had a leak around the I thought throttle shaft. Cleaned everything off and started it. The leak is actually coming from a large plug that is on the part of the governor next...
View ArticleClik here to view.
Cat 941B - which engine?
Quick question, which engine does my 941B 70H4428 have, is it a D330 or a 3304? in a brochure i got here it states D330 knocking out 80 HP, but it doesn't look like the D330 in my D4D Is there an easy...
View Article931 Caterpillar Loader manuals
Do anyone have any manuals for a serial # 78U 2340 for sale?
View ArticleThinking of buying Cat 963 A high hours
I've watched some videos of these things running, and I'm convinced I could buy this single machine to handle probably 10 different projects on my property. Anyway: - 963 A 21z - 16k hours - cab - less...
View ArticleCat bolt size?
I'm finally hoping to start taking the rotary swing cylinder off the backhoe on my 931B. To remove the top cover off the rotary actuator it says to use 2 Cat ID4608 bolts that thread into the cover to...
View ArticleSkid Steer Pallet Fork Help
I have a Cat 267B skid steer and need a set of pallet forks. It would be nice if I could get one with a carriage that could change to other attachments (such as a bale spear) but that isn't totally...
View Article953-C Transmission problem
Have a 99 953-c that if you go into forward or reverse the hydrostatic transmission indicator light flashes. If you put it into highest speed after a few seconds the transmission pressure override...
View ArticleRemoving rotary swing cylinder from 931b backhoe?
Hopefully I can get to this in the near future. I was wondering what some of you more experienced mechanics thought of this idea. Instead of taking the heavy and awkward rotary cylinder off vertically,...
View Article955l
Best solution for my problem Would like a blade for the ole girl so I 1 Looked for the original blade group for the machine 6K1016 No Go 2 Buy a 4 in 1 but then I would have to plumb for the 3rd valve....
View ArticleGlass removal from Kenco cab
One of the door frames on my Kenco Cab (953 Cat) needs welded back together and I need to remove the glass from the rubber molding to effect the repair. A call to Kenco resulted in helpful info, but I...
View ArticleTakeuchi TL150 hi speed issues
hello!I am having issues with my tl 150.it wont go into hi speed right away as it has been.I`ve only owned the machine for 30 hours and was working fine.now it doesnt go into high unless I rev it up...
View ArticleCat repair oddity and parts availability?
I could use some expertise. I got the rotary swing cylinder off the 931B backhoe today. I used the hooks on a tie down strap with a couple cover bolts and hooked a lifting strap to the open ends. It...
View ArticleReplacing upper spool in 964 bobcat
How do you install upper auxiliary spool in a bobcat 864g track loader
View ArticleCat 277A attachment hydraulic do not work, it moves and bucket works.
Cat 277A attachment hydraulic do not work , it moves and bucket works just no hydraulic to the attachment
View ArticleUpdate on rotary swing cylinder and question?
I dropped off the rotary swing cylinder for the backhoe this morning and came home to a message on the phone. Apparently the shaft is worn and that's a big reason it leaks so much. They need the OK to...
View Article