John Deere ct322 service and test manual
Hey guys, I am in need of a repair and test manual for a ct 322 John Deere. I tried calling my local dealer but they are saying it will be about two weeks to get once they place the order because they...
View Article953 c Calibration Issues 299.13
Hello all Had my drive motor rebuilt luckily caught it in time to save the drive motor, This machine is a older 953c 2zn0312 after installing the drive motor back on the machine, I now have a problem...
View Article983B crank seized, now what?
I feel like the dog that finally caught the car! I was out working on a county machine near home when a passerby stopped and asked if I worked for the public. I said yes and that's when my troubles may...
View ArticleClik here to view.
AC crawler loader
Found this setting at a friends machine shop. I looked it over , looks nice and pretty straight , didn't notice a bunch of oil under it. We were looking at it and he asked me what I thought it was...
View ArticleDresser 125G lubricant questions
My first post, great forum and lots of excellent information. I recently got what I believe is a 1990 Dresser 125G crawler loader (serial# 1252K5125). I am servicing the engine (cummins 4bt 3.9 L),...
View Articlecat 287b
I have a 287b with a Mitsubishi 3044c-t motor. The motor is knocking but still runs. Worst case , will need to replace it. Will a different motor work in that machine? A new replacement is around...
View ArticleNeed a 3304 engine for 963
Anyone know where I can find an engine for a 21z 963 loader?
View Article977 L hot oil
I have a fairly new to me 977L and the oil temperature gauge keeps wanting to creep into the red. I guess this is the torque convertor temperature.It did it today after having run for a couple of hours...
View ArticleTakeuchi TL130 no heat
I have a 2007 Takeuchi TL130 the heater just stop blowing hot air only cold. It was working just quit. Temperature gauge shows normal but no heat going to heater core. Any suggestions.
View ArticleClik here to view.
955L Installing the Lift Cylinder seals inside the Head plate
I finally received my multiplier wrench so I could remove the nut from the lift cylinder shaft. Yah! I was hoping someone on this forum had an easy way to install the seals inside the head cap. I...
View ArticleFiat-Allis FL14-C
Hello I am new to this forum. I have a JD 450 C , a AC Model D grader and a D-7 17-A dozer with a 70 Scraper. There is a Fiat-Allis FL14C loader for sale near me. I have no experience with these. Has...
View ArticleCat 955K Servicing
Hello, I have a 1970 Cat 955K. I have a few questions. I would like to know the ballpark cost of having a full servicing of machine? As in having a service tech come change all of the fluids. I also...
View ArticleTl26
My TL26 skid steer runs for 20 min and shuts off it seems like it's getting hot.flushed the radiator out but it keeps doing it any comments
View ArticleCase 1155e Torque Converter guage
Just purchased a used 1991 Case 1155E track loader. None of the gauges worked correctly. I have everything replaced except the hour meter and torque converter gauge. Where is the best place to buy...
View ArticleFL7B steering problems?
Hi, I have a FL7B that will not turn to the right. it trun left great. Question from looking the parts book I can't tell( it's not clear to me) if it uses oil pressure to disengage the clutch or engage...
View Article955L Transmission Trouble
Hello I have a 955L 85J4575 that I had the transmission rebuilt in. Actually the transmission that was in the machine had a bearing failure and just filled everthing in the transmission system with...
View ArticleASV HD 4500 will not move
My ASV HD 4500 suddenly stopped moving. I checked the pump and the solenoid in the hydraulic tank and there is power going to the solenoids. Anyone that has an older model like that I would love input.
View ArticleAdvice on what to buy.
I am wanting to purchase a track loader. Medium size. Not a newer one with all the electronics. Will be only used on the ranch cleaning ponds and filling a dump truck. Probably less than 200 hours per...
View ArticleCoolant in the Engine Oil- Cat 943
Hello All- This winter I noticed that coffee-colored oil was slobbering out of the oil dipstick tube on my 943. Oil quantity was over-full. I dropped the belly pan and drained the oil. It was somewhat...
View ArticleClik here to view.
Cat 953 Trans Dipstick Question
Hello Everyone- Hopefully this will be an easy one. Last fall I was blessed to be able to buy my first track loader an 80's model Cat 953 for use on my mountain property.:) I bought the unit at an...
View Article