T190 pulsing/surging
Hi, I have Bobcat T-190 that has been working fine. The last time I used it there were no problems. Today, it is pulsing/surging all hydraulics (drive, lift, tilt). The more you load the hydraulics,...
View ArticleIs this the end of the crawler loaders / track loaders?
Hello friends, it's okay with you? First, forgive me if there are any mistakes in my text, because English is not my native language and not speak so well. Let the chase ... My name is Humberto and...
View ArticleTakeuchi TL150 Hard to Start
I have an '04 Takeuchi TL150 and is very difficult to start. Once it is running there are NO problems. To start I have to crank for approx 20 seconds which can't be good on the battery/starter....
View ArticleHelp with 931B brake adjustment
I need some expertise on adjusting the brakes and linkage. I adjusted the rods for the steering valves so there is approx. .028 clearance on the cams. I loosened the linkage a half a turn more than I...
View Article953 3204 engine swap questions
I have a 1981 953 LGP (05Z) with a 3204 engine that is showing signs of severe blow by thru the valve cover vent and when powering up to full throttle a noticeable knocking noise has surfaced. The unit...
View ArticleLooking for some advive/help 125c International loader
hey guys, im new to this group and new to the world of working with crawlers. I have a international 125c track loader and its having some issues. bought it last summer and it done great. Last time I...
View ArticleBroke my cat 941 loader
OK my story starts like this. This summer i had to tare down my track loader for the torque converter seal. The seal was leaking pretty good. I noticed while i was taking the flexible drive coupling...
View Article955K shifter linkage questions
Hi everyone. I am looking at a 955K tomorrow. I've never owned one but use to drive my dads and have been doing a lot of reading on them. So I am a virgin when it comes to these machines. The one I am...
View ArticleQuestions on 931b brake adjustment?
There's good news and bad news but hopefully the bad news isn't that bad. I followed Bob/Ont's advice on adjusting the brakes on my 931B. On the left side I shortened the brake rod quite a bit to get...
View ArticleJD 755 crawler loader fluid questions
Hello all- Just bought a JD 755 crawler loader. Need to know before running it hard what fluids to put where- other than the obvious diesel fuel in fuel tank and antifreeze in radiator. What should I...
View Article2007 Case 440ct - Opinions - the good, the bad and the ugly.
I am thinking of adding a low hour tracked machine to my fleet. I really wanted a takeuchi tl140 or tl10 or even a tl150 or 12. I want an enclosed cab machine with ac. Not sure about hi flow. Today, I...
View ArticleHybrid loader from the 60's or early 70's?
I was looking at some old Cat brochures and pictures on the net and saw an interesting picture of a Cat wheel loader with the front wheels converted to crawler tracks. Not steel cleats on the tires but...
View ArticleAllis chalmers TS-5
Wondering if anybody can give me an estimated time to repair rightside steering clutch. Customer wants an estimate and i have no idea on this on. Ser is 6063
View ArticleClik here to view.
new here and wanted to say hi, and show off my fleet.
First off I just want to say hi! I've been reading the forum for the last few weeks and decided to join today while I was waiting on the cat to warm up. I hope yall enjoy my pics!! My 1990 953 with...
View Article175c
FYI , I seen a 175C on Louisville craigslist for 5900$. I know there are some guys on here that may be interested in it. Condition to me is unknown.
View ArticleThrown Track on a CAT 941
Working the CAT 941B today pushing some brush piles and while turning in reverse heard a loud bang and looked down to see the left track was off the rear sprocket. The track didn't come all the way...
View ArticleNew member and new to me Cat 933 loader
Owned lots of tractors but first time for a track loader. I picked up a Cat 933 that seems to be in fair condition, I would like to do a complete service since I do not know the history of the loader,...
View ArticleChange Head Gasket 931 b Cat 3204 engine
I need help, I have a 931 b cat loader with a blowed head gasket. It has been setting for a couple years now Im trying to fix it. I remove the value cover and see the rocker arm setting on a shaft....
View ArticleClik here to view.
Need some help on the track tension on my 953
I decided today that my tracks were lose so I checked them, and they were (I assume the correct tension guidelines are the same as a c series ~2" measured to the flat of a pad with a 2nd laid across...
View ArticleBobcat T590 opinions
I am buying a new Bobcat T590 and wanted opinions on the roller suspension. Please post the Pro's and Con's as I have not operated one. Thanks for the feedback!
View Article