Cat 977H Hydraulic pump conversion kit
Hello everyone, Does anybody know if there's a conversion kit available to convert the Vane pump in a 977H to a gear pump? My pump is going to need some attention soon and I was hoping there might be a...
View ArticleAnyone with a part numbers? International 100e track loader
Hi, My machine is an International 100E. I am trying to have my hydraulic rams rebuilt. the ones on the top side left and right of the hood. For some reason the hydraulic shop cannot find the proper...
View Article963 forestry package
I've been doing a lot of brush lately and it's taking it's toll on sheet metal and glass. Anyone built limb risers for a 963? I've seen a few pictures but none close enough to see how they hook to the...
View Article450 Case Loader
I have an older 450 Case crawler loader , it has been converted from a generator to an alternator , the problem is the bolt holes in the surge pump are striped and sides are broken , the pump is...
View Article963b
Hi Everyone. Im having trouble getting a MSO form Cat for a 963B track loader around a 1997 model year . Cat says it should have a 17 digit vin code but it only has 8 digits clearly stamped on the tag...
View ArticleFiat Allis FL14 B
Looking for info on this tractor. I found one and looked at it today but not familiar at all with Fiat Allis equip. It looks pretty good and I was told it will start, run, and opperate with hot...
View Article277B Cat 3044 engine
Do I need to purchase engine oil and hydraulic fluid from the dealer or can I purchase from a more reasonable priced source?
View Article933C hystat drive issue I need a little help with
4ms machine, the right side is not going into high speed...... Not forward or backwards, it stays into low even after the left side shifts into rabbit, machine functions 100% otherwise Pj
View ArticleClik here to view.
Thoughts/advice on keeping 955H
I have a '63 model 955H that I'm trying to decide if its worth while to replace the pads and rails on it or sell it as is and get a 955L, 175C or similar loader? The rails are well worn out, the...
View ArticleHoliday
Merry Christmas and a Happy New Year to all my friends here, and to your families a prosperous peaceful new year
View ArticleClik here to view.
955H PTO slips out of gear?
Hi, I have a 955H Track Loader, S/N 60A10479. It has petal steering and does everything I need it to do, runs good, no smoke, undercarriage is about 50%. Not long ago I hooked up the backhoe that came...
View Article977H Undercarriage options
Hello everybody, So now that I have 2 nice running 977Hs, (see http://www.heavyequipmentforums.com/...-Engine-damage) I'm thinking it sure would be nice to replace the worn out tracks on the older...
View Article953 77y .tranny concerns
What's up, new to forum here, outta ny, just bought and 1982,953 77y ser, machine is in great shape ! Bought it to replace my 78,977l that a recently sold,, meter reads 5,400 hrs , was sitting in a...
View ArticleDeere 450B bucket level indicator
Howdy, I have a Deere 450 track loader with Drott 4in1 bucket. It is missing the bucket level indicator. It doesn't have "return to dig"electrical. I want to fabricate a replacement indicator. I've...
View ArticleCat 941 Fuel Leak
Cat 941 sn80h2530 which is leaking fuel at the vent hose. Machine runs fine just pouring fuel (approx pint a minute) out vent hose. Problem started after changing filters. Have changed out the vent...
View ArticleASV RC60 Hydraulic Boom Creep
Just purchased a 2006 ASV RC60 2350 HRS, Had to give her some TLC and about $4K in parts to get the unit to good working condition. Now that the unit is working I find the boom will not hold position,...
View ArticleIH 175 B trans fluid in the final drive
Hello All Our 175 B has trans fluid in the final drive ? Our thoughts are the seal on the drive shaft that comes from the transmission in to the final drive we only lately replaced the bearings and...
View ArticleRolling A-frame hoists for trucks frames
Anyone here use a A-frame to roll off a complete truck assembly for performing work on their finals? I am considering going this route rather than hacking up the rear support area and trying to weld it...
View ArticleClearing a fence line with a JD 2010 and a 175B
Just thought I would put this up as you spend a lot of time repairing them sorry about the camera work hard to drive and hold a camera but I think you get the idea enjoy...
View Articletrack tensioning
I gather that most tracked loaders have the same kind of track tension system, drive slowly to a stop without using brakes, remove the hatch apply grease adjust the tension nut. However I don't seem to...
View Article