So now that I have the tilt cylinders off the CAT 941B (Ser #806907) to replace the Blown Seals (previous post) I looked over the pins/bearings on the cylinder. The barrel end bearings & pin looked pretty good other than missing the seals. The bearings/pin on the piston end didn't look so good so I think while I have this thing apart I may as well replace them. There was significant "play" and the pins were grooved. I looked up the parts in the Parts Book I was given when I bought the machine but on the cover it states Serial Numbers 80H3884 to 80H5702 so I'm wondering if the part numbers from that book will be the same for my 80H6907 machine. The part numbers I came up with were Bearing = 7J9682 and Pin = 7K9357, seals being SP93. I did a quick "google" search for that part number and a number of aftermarket companies have them listed, for what I think are some pretty decent prices as compared to the online CAT prices. So, my humble request is confirmation that those are the part numbers for my machine. BTW the cylinders numbers are 3G-8085 and 8J-5937 if that matters. Thanks in advance.
↧