I have a 955L Ser# 85J11XXX with a 4 in 1 bucket. Tractor runs, digs, and moves fine. The problem is that when I go to use the 4 in 1 lever to open the bucket clamp, the hydraulic oil starts pumping out of the filler neck tube. The oil level is correct in the sight glass window but when I use the 4 in 1 lever the sight glass fills up and pumps out fluid as long as I lever in the raised position. The fluid stops spilling out when I return the lever to the close position. The oil does not appear to be foaming or have any air bubbles present. Any ideas?
↧